General Information
      Back to home
      1. Knowledgebase
      2. Android Devices
      3. General Information

      How Do I Lock My Mach Peripherals

      Learn how to securely lock your Mach Camera and RFID Reader in place.

      This step-by-step guide will help secure your Mach Camera and RFID Reader in place, preventing them from being tampered with or damaged at their hinge point.

      1. Disconnect the Peripheral: Before starting, ensure the peripheral is not connected to your Mach device. If it’s plugged in, the screw holes will obstruct the necessary steps.

      2. Remove the Back Casing: At the bottom of the peripheral, you'll notice some designated pry points. Carefully use these points to remove the back casing.

      3. Tighten the Set Screw: Inside, you’ll find a set screw. Gently tighten it to your preferred level of security. 

       

      For reference, here’s an image showing the interior of the camera device.



      PXL_20250129_151022147-1

      By following these steps, your device will be locked into place, helping to prevent unwanted adjustments or damage.

       

      Here is a video walking you through the entire process.